If you find your Husqvarna lawn mower deck too low, you need to make adjustments. Here is a guide on how to level a Husqvarna lawn mower deck in a few steps.
How To Level A Husqvarna Lawn Mower Deck | Pad Outdoor
Any homeowner who owns a lawn will know how important a leveled lawn mower deck is. When you buy your Husqvarna lawn mower, you need to know how to level a Husqvarna lawn mower deck so that the blades don’t go too close to the ground.
You see, if the deck is too low, it will scrape away the lawn and ruin it. That’s why leveling a Husqvarna mower deck is very important in keeping your lawn’s health.
Fortunately, we know exactly how to do that and we are going
to teach that to you in this article.
Reasons Why Your Lawn Mower Deck In Unleveled
If you find your Husqvarna deck too low, there could be a number of reasons for that.
Before we go to the guide on how to level a Husqvarna riding mower deck, it’s better to first understand the reasons as to why it is unleveled in the first place.
Here they are below:
Low deck making the blades too low
Tilted deck that can cause the blades
to have an angle
Overextended blades from the deck
Wet and uneven lawns
These are some of the main causes for uneven lawn mower decks. However, they can all be fixed if you can do a simple Husqvarna lawn mower height adjustment– which we are going to teach you right below.
How To Level A Husqvarna Lawn Mower Deck Guide
The first thing you need to do is get
the right materials and tools for the job. You’ll need adjustable wrenches,
measuring tape, a bicycle tire pump, and an air pressure gauge.
Once you have all of those, you can
follow these steps:
1. Prepare Your Lawn Mower
Before doing anything, you need to
prep up your lawn mower. First, make sure that it is placed on a flat surface.
After that, press on the brake lever and push the clutch upward. This will stop
the blades. After that, pull the attachment lever on the left and place it on
the highest configuration.
2. Turn On The Lawn Mower
After that, ignite the lawn mower and
leave it in ignition. After that, open the engine hood and take out the spark
plug boot. This will allow the engine to cool down.
3. Check The Pressure
Take out the valve stem cover of each
tire and bring out your air pressure gauge. For low pressure, add more air to
the tires. If the air pressure is too much, let go of some of the air inside
the tire.
The key here is to make sure that the
pressure matches the listen figure in the tire itself. It should never have
more air than the listed figure.
4. Adjust The Blades
For this step, you may need to have a
pair of leather gloves so that you won’t cut yourself. In this step, you need
to turn the blades on the both sides of the deck so that they are symmetrical.
Make sure that you measure the
distance of the left blade and the right blade to the ground in order to know
if it is too near. After that, take out your wrench and adjust the nuts on the
driver’s seat to lift the deck.
Turn the nut left to lower it and
turn it right to raise it.
5. Measure The Blade To The Ground
The adjusting of the blades may take
awhile, but you need to make sure that the front measurement should be ⅛ inches
to up to ½ inches lower than the back measurement. If you haven’t gotten that
measurement, go back to step 4 until you do.
6. Put Everything Back In Place
Now that you’ve leveled your lawn
mower deck, the last thing to do is put everything back in place and test your
lawn mower. If everything is good, then you’re good to go. If not, repeat the
steps again.
Conclusion
Sure, it may be a little bit complicated to level your lawn
mower deck at first, but once you get the hang of it, it’ll be easy. As long as
you follow these steps on how to level a
Husqvarna lawn mower deck, you’ll get the job done.
So, make sure you memorize this guide by heart the next time this type of problem happens.
