Want to change the blades of your riding mower? We know how to change blades on riding mower without removing deck. Learn how to do that with this guide.
When the blades of your riding mower wear out, you won’t be able to cut your grass efficiently. But if you’re new to owning a riding mower, you may have a hard time figuring out how to change the blades. how to change blades on riding mower without removing deck so that you’ll have an easier time.
In this guide, we’re going to show you how it’s done.
Is It Possible To Change Riding Mower Blades Without Removing Deck?
First of all, you may be asking yourself if it’s possible to change the riding blades without removing the deck. Most people know how to lift riding mower to change blades because that’s the primary way to change blades. But is it the easiest? By all means no. And fortunately, it is possible to change mower blades without taking out the dock.
You see, the blades are found at the bottom part of the mower. So, if you have a jack or a tool that can lift the riding mower just enough to expose the blade. Once the blade is exposed, all you need to do is follow the steps we provided below. So far, that’s the easiest way to change mower blades.
How To Change Blades On Riding Mower Without Removing Deck (Step-By-Step)
Now that we’ve established how easy it is to change the blades of a riding mower without taking out the deck, let’s move on to the actual steps on how to do it.
1. Check The Condition Of The Blades
The first thing you’ll want to do is check the condition of the blades. You’ll need to know if you actually need to change it or not. If it’s just dull, you can actually save yourself a bundle and just use a grinder to sharpen it. But if it’s really worn out, then you’ll need to change it.
2. Park Your Mower
Once you’ve determined the need to change the blade, the next thing you need to do is park your mower on a flat surface. Make sure you switch it off, take out the key, and put the brake so it won’t move while you take out the blade.
If it’s still on, there’s a possibility that the blades will move while you’re changing them. This is extremely dangerous and will result in a really bad injury.
3. Take Out The Spark Plug
Another safety precaution you need to observe is taking out the spark plug. To do this, simply open the hood and take out the black wire between the spark plug and engine.
4. Lift The Mower With A Jack
The next thing you’ll want to do is bring out the jack that can lift it. Do take note that not all jacks are strong enough to take the weight of a mower rider. You need to get a strong jack to do this. If you don’t have a jack, you can prop up the deck with a cinder block or a bunch of bricks.
5. Take Out The Mounting Nut
By jacking up your machine, the blade will be exposed. In order to take out the blade, turn the mounting nut (in the middle of the blade) counterclockwise. By doing this, you’re loosening the blade. Just take it out once it’s fully loose.
6. Put The New Blade On
Once the old blade is out, you can easily put the new blade on by sliding it on the shaft. From there, turn the mounting nut in the opposite direction. Make sure the blade is placed tightly.
Conclusion
See how easy it is to learn how to change blades on riding mower without removing deck? We were able to do it in just 6 really simple steps.
Of course, you’ll need a jack to make things easier for you. But for those without a jack, just get some brick or concrete blocks to prop your machine up. If you have those at your disposal, then you’ll easily be able to change the blade without much trouble.
So, if you want to change your mower blades without taking out the deck, refer back to this guide.
We hope you’ll have a much easier time because of our guide.
Recommended Reading: