If your sprinkler head is stuck and can’t turn, we’ll help you fix it. This guide will tell you the steps on how to fix a sprinkler head that won’t rotate.
How To Fix A Sprinkler Head That Won’t Rotate | Pad Outdoor
Having stuck Orbit sprinkler heads is a pretty common problem
for lawn owners. It does happen from time to time and it happens for a lot of
reasons.
But the one thing that we have to know is how to fix a sprinkler head that won’t rotate. Luckily, you can easily do something if ever your orbit sprinkler won’t rotate.
All you need to do is follow the steps that we’ll lay out for
you below. We hope that this guide can be a big help in ensuring your lawn
continuously gets the moisture it needs!
Reasons Why Your Sprinkler Head Won’t Rotate (Orbit Sprinklers)
Before we go to the steps on how to fix a sprinkler head that doesn’t rotate, we need to first know how to diagnose the stuck sprinkler.
As we mentioned above, there are quite a number of reasons as to why sprinkler head will not rotate. By knowing the reason, you can at least prevent it from happening in the future. After all, even if fixing this problem is not that hard, you still don’t want it to happen.
So, if you’re wondering, here are the answers to the question of, “why my sprinkler head won’t rotate?”
Internal Damage
The first cause of this problem is
internal damage. You see, your sprinkler is filled with a lot of gears and
cogs. If any of them wear out, then your sprinkler head will not move anymore.
In order to prevent this, you simply
need to take care of the internal system. You need to lubricate the gears and
make sure that they are running right. That way, they won’t give way.
Filter Clogging
Another main reason for this problem
is clogging in the filter. The filter is used to capture dirt so that it does
not get into the sprinkler nozzle. However, the filter may be clogged up there
is too much dirt going inside.
That said, the best way to prevent
this in the future is to make sure to clean up the filter with a brush
regularly. That way, there won’t be any excess dirt.
Clogged Supply Tube
Aside from just the filter, the
supply tube may also get clogged from time to time. Instead of dirt, sand may
go inside the supply tubes.
The same thing must be done as the
filter. You need to unclog the supply tubes by cleaning out the tubes of dirt
and sand.
Sprinkler Head Damage
The last possible reason is simply a
damaged sprinkler head. They also wear out over time if not taken care of. They
also get damaged if ever a car or a lawn mower hits them.
So, you need to be extra careful with
where your sprinklers are otherwise you might damage it.
How To Fix A Sprinkler Head That Won’t Rotate
Let’s say that you’re already
experiencing problems with your sprinkler head, what’s the first thing to do?
Well, here are the tips on how to
perform the fixes:
Clean Out Clogged Areas
Luckily, Orbit sprinkler heads are
really easy to clean. From the causes that we’ve mentioned above, you can
either check the supply tube and filter. Clean them both out so that you can
get your Orbit sprinkler head working.
Replace Worn Out Parts
Another thing you may need to do is
replace worn out parts. If the internal is all rusty and totally worn out or
the head is totally damaged, you may need to replace your Orbit sprinkler if
you cannot get it repaired.
Increase The Water Pressure
One of the things you need to take
note of is the water pressure. If ever the water pressure of your sprinkler is
way too low, then it will not rotate since not enough water is pushing it.
That said, you simply need to
increase the pressure. To do this, you can decrease the size of the sprinkler’s
irrigation zones. Another thing you can do to address this is use a big
backflow preventer.
Conclusion
It’s pretty easy to spot a stuck sprinkler head. So, when you do, bring out this guide on how to fix a sprinkler head that won’t rotate. From there, quickly perform a diagnosis to know the cause of the problem. After that, you’ll be able to know exactly what to do to fix it.
