Is your Husqvarna drive belt too loose? Here are a few ways on how to tighten drive belt on Husqvarna riding mower along with a few safety tips to help.
If you have a big lawn, then one of the things you should have is a Husqvarna Riding Mower. This is a powerful mower that makes use of a dual mower deck that is powered by a drive belt.
One thing to know about this mower is that the drive belt plays a very important role. The drive belt is the device that determines whether the blades will move or stay still.
In a nutshell, loosening the drive belt will allow the blades to become stationary. On the other hand, tightening it will get the blades moving.
Now, if you have just bought a Husqvarna riding mower, you probably don’t know how to tighten drive belt on Husqvarna riding mower yet. If you don’t, worry not because we have a guide on how to adjust belt tension on riding lawn mower.
Check it out below:
- How To Tighten Drive Belt On Husqvarna Riding Mower (6 Steps)
- Safety Tips
How To Tighten Drive Belt On Husqvarna Riding Mower (6 Steps)
1. Park Your Riding Mower
The first thing you need to do is turn on the mower using the ignition switch and look for a place to park your riding mower. By now, your blades shouldn’t be moving since you haven’t tightened your drive belt yet. Next, park the mower to the side by hitting on the parking brake pedal on the left.
2. Look For The Log Lever
After that, you need to look for the log lever. If you don’t know where it is, simply look for the control panel, and you’ll be able to find it somewhere at the control panel’s top area.
3. Pull The Paddle Handle
Near the log lever, you’ll be able to find a paddle handle. All you have to do is pull the lever toward the steering wheel and the drive belt should be tightened.
4. Double Check The Blades
After doing that, you’ll want to check to see if it worked. If it did, your blades should be moving.
5. Loosen The Drive Belt
If you want to loosen the drive belt, you just need to push the lever away from the steering wheel. You’ll pretty much be doing the opposite of what you did.
6. Double Check Again
Once again, you’ll want to double check if that worked. Once you push the lever away, the blades should stop moving already.
We all know that blades can be very dangerous. That’s why you need to be very careful when dealing with your drive belt. Here are a few safety tips that you may want to take note of when you handle this kind of machine:
Always Read The Manual
This is one of those common sense safety steps that a lot of beginners skip. Always read the manual! If you want to make sure that you know every detail about the drive belt and the operating system, the manual will give you all the details you need.
Always Double Check The Blades
Notice how we emphasized in the steps above that you need to always double check the blades to see if they’re moving accordingly when you move the lever? This is to ensure that the blades won’t just start cutting up everything without you knowing.
So, whenever you move the lever, check the movement of the blades always just to be sure.
Check To See If The Drive Belt Works
There may be times when you’ll have Husqvarna mower drive belt problems without you even knowing. Some of these problems may even require you to change your drive belt if ever it is damaged.
To know, all you have to do is play around with the lever and check the blades from time to time just to see if everything is working well.
As you can see, it’s actually very easy to learn how to tighten drive belt on Husqvarna riding mower. All you need to do is follow the short and simple steps that we’ve provided above. Also, don’t forget to take note of the safety tips we also listed down.
Now that you know how to tighten your Husqvarna riding mower drive belt, you can do it anytime you need.
Turn up your machine and get those blades moving so that you can cut your lawn grass!